Most Recent Version: v2.71 - 28Jan02

CurrentMonitor is a Windows-based real-time and post-processing software program designed
specifically for use in stationary/moored applications where discharge data is not required. The
easy-to-use software allows you to confidently measure current profiles in less time than ever.
Requirements: any up, down, or side-looking ADP (neither bottom-tracking nor GPS is needed).

Features

• CurrentMonitor software is compatible with Windows Vista/XP/2K/98.
• Bathymetry profile
• View/Analyze the following data:
  • Velocity
  • Acoustic signal strength
  • Velocity standard deviation
  • Signal-to-noise ratio
  • Temperature
  • Pressure
  • Heading
  • Pitch
  • Roll
• Observe velocity data in beam, XYZ, or ENU (East-North-Up) coordinates.
• Reference velocity data to the ADP, bottom-track data, or GPS data.
• Rotate velocity profiles to a user-selected angle.
• Adjust scaling factors and change scaling units.
• Zoom-in on a selected range of profiles.
• Limit the range of profiles loaded.
• Load more than one data file (restricted only by amount of available
  computer memory).
• Display configuration information, hardware information, and user setup
  information.

System Requirements

• SonTek/YSI ADP (up, down, or side-looking; with or without bottom-tracking; with or without GPS)
• Microsoft Windows Vista/XP/2K/98
• Pentium processor or above
• 32 MB memory
• 5 MB available disk space
• Monitor capable of 800x600 resolution or better
• 16-bit color or better recommended