Exceed your expectations both during and after measurement with RiverSurveyor LIVE software, a Windows XP/Vista compatible package with the latest advancements for open channel hydraulics visualization. Or, view your data from the convenience of your mobile phone! This software includes language support for English, Chinese, Japanese, Spanish, Catalan, French, German, Italian, Korean, Portuguese, Turkish, and Hungarian.

RiverSurveyor LIVE with SmartPulseHD™ contains intelligent algorithms that look at water depth, velocity and turbulence, and then adapts the acoustic pulse scheme to those conditions. See the clearest velocity picture possible with cell sizes down to 2 cm!

The RiverSurveyor Stationary Live real-time and post-processing software was designed specifically for use in rivers. The features in this software make the RiverSurveyor S5/M9 a more powerful tool, and allows you to reliably use this system in more places than ever before.

NOTE: You can install RSSL to view stationary data; however, a firmware license is required to collect stationary data. Purchase stationary license now.

More Information

(NOTE: Please refer to "RiverSurveyor LIVE" software for use with RiverSurveyor S5 & M9)

ADP real-time and postprocessing software for discharge data applications - typically rivers, streams, estuaries. Requires down looking, mobile, bottom-tracking ADP (with or without GPS). Includes the RiverSurveyor System Manual.

A software license is required to run this program, which requires that the ADP has the bottom-track option. If your ADP has the bottom-track option installed, but you have not received a software license to run RiverSurveyor, you can request a RiverSurveyor software license.

Important: If you have a version of RiverSurveyor that is earlier than v4.20, we recommend that you UNINSTALL the "old" version before installing the "new" version. This is REQUIRED for any of our beta testers.

More Information

New RiverSurveyor S5/M9 firmware introduces SmartPulseHD*, allowing you to view data in high-definition as well as dramatically enhancing the S5/M9's ability to make low-velocity measurements. This version also introduces the stationary data collection option. You must purchase a firmware license to collect stationary data; however, no license is needed to view stationary data using the RiverSurveyor Stationary Live software. Purchase stationary license now.

IMPORTANT: An Access Code is required to enable SmartPulseHD features. Download the firmware file, unzip it and read the Release Notes for complete installation instructions.

ADP real-time and postprocessing software for stationary or moored applications where discharge data is not needed. Requires an up, down, or side-looking ADP (neither bottom-tracking nor GPS is needed).

More Information

ADP real-time and postprocessing software for open ocean applications where discharge data is not needed. Requires down looking, mobile ADP with bottom-track (with or without GPS).

*Note: A software license is required to run this program, which requires that the ADP has the bottom-track option. If your ADP has the bottom-track option installed, but you have not received a software license to run CurrentSurveyor, you can request a CurrentSurveyor software license.

Important: If you have a version of CurrentSurveyor that is earlier than v4.20, we recommend that you UNINSTALL the "old" version before installing the "new" version. This is REQUIRED for any of our beta testers.

More Information

ADP planning and setup software for autonomous deployments. Helps determine battery power and recorder space requirements.

More Information

Generates velocity-index ratings for flow, velocity, and stage measuring instruments (e.g., Argonaut-SL, Argonaut-SW, FlowTracker, RiverSurveyor).

*Note: A software license is required to run this program. Without a license, FlowPack will operate for 14 days. Afterwards, you must purchase the program either online through the software, or by contacting SonTek Sales.

Licensed Users: If you are upgrading your copy of FlowPack on the original computer, use the above download link to get the latest copy — the program will recognize your license. However, if you are installing this program on a different computer, you will need to purchase a new license. If you wish to move your licensed copy of FlowPack to a different computer, contact SonTek Support.

More Information

(NOTE: This version of Stationary is for previous versions of the RiverSurveyor, and NOT for use on the RiverSurveyor S5/M9. Click the "RiverSurveyor" software tab to access RiverSurveyor Stationary Live).

ADP real-time and postprocessing software for discharge data applications, especially in moving-bed conditions (typically rivers, streams, estuaries). Requires an ADP.

*Note: A software license is required to run this program. Without a license, this software will not operate. You may purchase the program and accompanying license by contacting SonTek Sales.

Licensed Users: If you are upgrading your copy of Stationary Measurement on the original computer, use the above download link to get the latest copy — the program will recognize your license. However, if you are installing this program on a different computer, you will need to know the license number (included on original CD jacket). If you cannot locate your license number, contact SonTek Support with your system's serial number.

More Information

ADP/PC-ADP postprocessing software.

More Information

ADP/PC-ADP data display and analysis software. This "Pro" version supports directional wave measurement studies and advanced data analysis. Requires directional waves option.

*Note: A software license is required to run this program. This license requires that you purchase the directional waves option. If you have this option, but have not received the required software license, you can request a ViewADPPro software license.

More Information

Latest ADP firmware. Login for special system requirements.

Latest Poseidon ADP firmware. Login for special system requirements.

Latest PCADP firmware. Login for special system requirements.

Utility program (Windows 7 32-bit/Vista/XP/2K or 98/95) that lets you "talk" directly to the instrument, download data from an internal recorder, calibrate the internal compass/tilt sensor, and run diagnostics.

More Information

Utility programs for use with a PDA that runs with the following operating systems: Handheld PC 2000 (HPC) or a PocketPC/Windows CE PPC). SonUtils lets you "talk" directly to the instrument, download data from an internal recorder, and set up for a deployment.

More Information

ADP DOS-based programs used to control operation and to access data.

ADVField and MicroADVField data collection and review software.

*Note: ADV systems using HorizonADV must have ADV CPU firmware version 8.0 or later installed. If you need to update your system's firmware, contact SonTek Support.

Important: If you have a version of HorizonADV earlier than v1.00, we recommend that you UNINSTALL the "old" version before installing the "new" version. This is REQUIRED for any of our beta testers.

More Information

ADV postprocessing software (Windows) developed by Tony Wahl (USBR).

More Information

Latest ADVField firmware. Login for special system requirements.

Utility program (Windows 7 32-bit/Vista/XP/2K or 98/95) that lets you "talk" directly to the instrument, download data from an internal recorder, calibrate the internal compass/tilt sensor, and run diagnostics.

More Information

Utility programs for use with a PDA that runs with the following operating systems: Handheld PC 2000 (HPC) or a PocketPC/Windows CE PPC). SonUtils lets you "talk" directly to the instrument, download data from an internal recorder, and set up for a deployment.

More Information

ADVField and MicroADVField DOS-based programs used to control operation and to access data.

*Note: For systems using firmware versions before v4.0 (c.1995), download v2.40 of this software.

ADV postprocessing software (Windows) developed by Tony Wahl (USBR).

More Information

ADVLab DOS-based programs used to control operation and to access data. This version is for systems WITHOUT analog inputs.

ADVLab DOS-based programs used to control operation and to access data. This version is for systems WITH analog inputs.

ADV postprocessing software (Windows) developed by Tony Wahl (USBR).

More Information

MicroADVLab DOS-based programs used to control operation and to access data.

Hydra data display and analysis software (Windows).

More Information

Hydra data display and analysis software (Windows). This "Pro" version supports directional wave measurement studies and advanced data analysis. Requires directional waves option.

*Note: A software license is required to run this program. This license requires that you purchase the directional waves option. If you have this option, but have not received the required software license, you can request a ViewHydraPro software license.

More Information

Utility program (Windows 7 32-bit/Vista/XP/2K or 98/95) that lets you "talk" directly to the instrument, download data from an internal recorder, calibrate the internal compass/tilt sensor, and run diagnostics.

More Information

Utility programs for use with a PDA that runs with the following operating systems: Handheld PC 2000 (HPC) or a PocketPC/Windows CE PPC). SonUtils lets you "talk" directly to the instrument, download data from an internal recorder, and set up for a deployment.

More Information

The SonTek IQ Window-based software package contains an all in one package for interfacing with the SonTek IQ and IQ Plus.  The software is used to interface, configure the system, visualize and export data.

More Information

For best results please use the most recent version of the SonTek-IQ firmware. Login for specific system requirements. Continue to visit sontek.com for updates as they become available.

FlowTracker (Windows-based software) lets you perform diagnostics, download data from the internal recorder, review data, generate reports, export data as ASCII files, and export data files that are compatible with the FlowPack velocity-indexing software tool.

More information

Generates velocity-index ratings for flow, velocity, and stage measuring instruments (e.g., Argonaut-SL, Argonaut-SW, FlowTracker, RiverSurveyor).

*Note: A software license is required to run this program. Without a license, FlowPack will operate for 14 days. Afterwards, you must purchase the program either online through the software, or by contacting SonTek Sales.

Licensed Users: If you are upgrading your copy of FlowPack on the original computer, use the above download link to get the latest copy — the program will recognize your license. However, if you are installing this program on a different computer, you will need to purchase a new license. If you wish to move your licensed copy of FlowPack to a different computer, contact SonTek Support.

More Information

Latest FlowTracker firmware. Login for special system requirements.

Utility program (Windows 7 32-bit/Vista/XP/2K or 98/95) that let you "talk" directly to the instrument, download data from an internal recorder, calibrate the internal compass/tilt sensor, and run diagnostics.

*Note: A software license is required to run this program. If you have not received the required software license, you can request a ViewTritonPro software license.

More Information

Utility program (Windows 7 32-bit/Vista/XP/2K or 98/95) that lets you "talk" directly to the instrument, download data from an internal recorder, calibrate the internal compass/tilt sensor, and run diagnostics.

More Information

Utility programs for use with a PDA that runs with the following operating systems: Handheld PC 2000 (HPC) or a PocketPC/Windows CE PPC). SonUtils lets you "talk" directly to the instrument, download data from an internal recorder, and set up for a deployment.

More Information

Argonaut deployment, postprocessing, and diagnostic software.

Note: We recommend you first uninstall your old version of ViewArgonaut before installing this new version.

More Information

Generates velocity-index ratings for flow, velocity, and stage measuring instruments (e.g., Argonaut-SL, Argonaut-SW, FlowTracker, RiverSurveyor).

*Note: A software license is required to run this program. Without a license, FlowPack will operate for 14 days. Afterwards, you must purchase the program either online through the software, or by contacting SonTek Sales.

Licensed Users: If you are upgrading your copy of FlowPack on the original computer, use the above download link to get the latest copy — the program will recognize your license. However, if you are installing this program on a different computer, you will need to purchase a new license. If you wish to move your licensed copy of FlowPack to a different computer, contact SonTek Support.

More Information

Utility program (Windows 7 32-bit/Vista/XP/2K or 98/95) that lets you "talk" directly to the instrument, download data from an internal recorder, calibrate the internal compass/tilt sensor, and run diagnostics.

More Information

Utility programs for use with a PDA that runs with the following operating systems: Handheld PC 2000 (HPC) or a PocketPC/Windows CE PPC). SonUtils lets you "talk" directly to the instrument, download data from an internal recorder, and set up for a deployment.

More Information

Latest Argonaut-ADV firmware. Login for special system requirements.

Latest Argonaut-MD firmware. Login for special system requirements.

*Note: Not for use with SL/SW/XR systems.

Latest Argonaut-SL/SW/XR firmware. Login for special system requirements.

*Note: Not for use with MD systems.

Argonaut-ADV DOS-based programs used to control operation and to access data.

*Note: Not for use with MD/SL/SW/XR systems.

Argonaut-MD/SL/XR DOS-based programs used to control operation and to access data.

*Note: Not for use with Argonaut-ADVs.